ZETRON 4010, Programming Manual

Page: 87 / 117

Appendix D. CPS Menu Structure
The assigned spare output will toggle on and off with each press of the spare output
latching key. The red LED will toggle to show the state of the output.
S
PARE
O
UTPUT
T
OGGLE
The assigned spare output will toggle on and off with each press of this key. The red
and green LEDs will toggle to show the state of the output.
S
PARE
O
UTPUT
M
OMENTARY
The assigned spare output will be activated only as long as the key is pressed. The
green LED will blink as long as the key is pressed.
For each spare output assigned, select the desired output number (1-8) in the window
shown in Figure D-32.
Spare Output Number [ ]
Figure D-32. Spare Output Number Window
The three spare output functions will only be available if the main PC board
Spare/Aux. outputs have
not been defined as “Auxiliary Outputs” in the SYSTEM
CONFIGURATION menu (this is the default).
e) Custom Channel Functions
The Custom Channel Functions are used to customize the channels that were defined as
“Custom” in the SYSTEM CONFIGURATION menu. Each key must have the desired
transmit and receive tones or DC currents assigned.
DC
If the channel is defined as a DC controlled channel, choose the desired current for
receive and transmit from Table D-1 and Table D-2.
After choosing the desired DC control function current, you will be asked if you want
the key to toggle between two different functions, as shown in Figure D-33. The
LEDs will toggle to show the state of the switch.
Single Function Key
Toggle Function Key
Type of Key [ ]
Figure D-33. Type of Key Window
If you choose the toggle function, you will be asked for the second transmit and
receive function currents.
025-9229C.1 D-23