ZETRON 4010, Programming Manual

Page: 83 / 117

Appendix D. CPS Menu Structure
P
AGE
S
END
This paging function will terminate any manual page entry in progress (as if a PAGE
ENTER key had been pressed), and begin transmitting the manual page stack on the
currently selected channel(s) in the order the pages were stacked (entered). The page
stack is retained and can be transmitted again (on different channel(s), for example)
by pressing this key again.
P
AGE
S
AFETY
If this function is programmed, instant-call pages will not be transmitted until this key
is pressed, allowing the operator to review the selected instant-call pages before
sending them. If this key has not been programmed, pressing an instant-call page key
will begin the page transmission immediately.
c) Extended Channel Functions
The additional channel functions shown in Figure D-25 can be assigned to Standard Tone
and/or DC controlled channels.
A. CTCSS Select
B. Repeat On / Off
C. Coded / Clear
D. Second Receiver Unmute/Mute
E. Wild Card I On / Off
F. Wild Card II On / Off
Selection [A]
EXTENDED CHANNEL FUNCTIONS
Figure D-25. EXTENDED CHANNEL FUNCTIONS Menu
CTCSS S
ELECT
This command activates CTCSS (constant tone coded squelch signal) over-ride. This
key will cause the PL (private line) feature to be disabled thereby allowing all radio
activity to be monitored by the console operator. Refer to Appendix A or B for the
actual tone or DC current transmitted.
R
EPEAT
ON/OFF
This key will toggle the radio repeater ON/OFF function on the appropriate channel.
Refer to Appendix A or B for the actual tone or DC current transmitted.
C
ODED
/C
LEAR
This key will toggle the coded/clear function on the appropriate channel. Refer to
Appendix A or B for the actual tone or DC current transmitted.
S
ECOND
R
ECEIVER
U
NMUTE
/M
UTE
This key will toggle the radio Mute on/off function on the appropriate Tone
controlled channel. Refer to Appendix A or B for the actual tone transmitted.
025-9229C.1 D-19