ZETRON 4010, Spec Sheet

Page: 4 / 4

www.zetron.com
ZETRON AMERICAS
PO Box 97004,
Redmond, WA USA
98073-9704
(P) +1 425 820 6363
(F)
+1 425 820 7031
(E) zetron@zetron.com
©Zetron, Inc. All rights reserved. Zetron® and
Zetron and Design® are registered trademarks of
Zetron, Inc. All other trademarks are properties of
their respective owners.
See Zetron price list for option pricing.
Specifications subject to change without notice.
005-0447T January 2018
ZETRON EMEA
27-29 Campbell Court,
Bramley, Hampshire RG26
5EG, United Kingdom
(P) +44 1256 880663
(F) +44 1256 880491
(E) uk@zetron.com
ZETRON AUSTRALASIA
PO Box 3045, Stafford Mail
Centre, Stafford QLD 4053,
Australia
(P) +61 7 3856 4888
(F) +61 7 3356 6877
(E) au@zetron.com
The Power to Respond The Power to Respond
Specifications
TRANSMIT ELECTRICAL SPECIFICATIONS
Audio Output: +10dBm max. into 600 ohm line
Output Impedance: Transmit: 600 ohm balanced
Idle: 600 or 3500 ohms
Distortion: <2% at full output. Hum, Cross-Talk
all -50 dB at full output
Microphone Input: -65 dBm for full output
Aux. Mic Input: -20 dBm for full output
Page/Spare Input: -15 dBm, not compressed
Frequency Response: -3 to +1dB from 250-5000 Hz except guard
tone notch
Compression: Input level increase of 30 dB above knee of
compression causes <3 dB output increase
RECEIVE ELECTRICAL SPECIFICATIONS
Input Impedance: 600 or 10K ohm (4-wire)
3500 ohm (2-wire)
Line Balance: 66 dB at 1000 Hz
Rx Sensitivity : -30 dBm max. at knee of compression;
adjustable
Frequency Response: -3 to 1 dB from 250-5000 Hz except
guard tone notch
Compression: Input level increase of 30 dB above knee of
compression causes <3 dB output increase
Distortion: <2%
Call Light: Sensitivity 20 dB below knee of compression
Audio Outputs: 5 watts into 4 ohms
Mute: Programmable from 0 to -28 dB or full mute
“All-mute” time programmable
PHYSICAL SPECIFICATIONS
Size:
• Desktop: 9” high x 18” wide x 14” deep
• Rackmount: 10.5” high x 19” w x 10.5” deep
Weight: 15 lbs.
Dust/Liquid Ingress: NEMA 1, IEC 60529 IP 30
Operating Temp: 5 to 50 degrees Celsius
OTHER ELECTRICAL SPECIFICATIONS
Channel Interface:
• Tx/Rx Audio pair (for 2w/4
• Rx Audio pair (for 4w)
• PTT relay contact
• Busy out
• Busy in / X-Mute in
• Supv control / main-stby
• Recorder Out
Channel Control: Local, E & M, Tone Remote, DC Remote,
Telephone (tip/ring)
Local Control: PTT normally open relay contact rated
1.0 A at 24 VAC/DC
E & M Control: Tx control via PTT relay, external 48V required
Tone Control: 15 standard tones supported,
programmable (no trimmer adjustment)
650-2050 Hz. High Level Guard Tone
duration 120-600 msec. Function Tone
Duration 40 msec. Guard Tone Freq.
2175 Hz, alterable. Tone freq. accuracy
+/-0.2%; timing ac/-1.0 %
DC Control: Programmable for +/-2.5, 5.5, 6.0, 11, 12.5,
and 15.5 mA. Operable up to 8K ohm loop
resistance
Ac/-.25mA
Busy Chan. Detect: Local Cross-Busy detection; Guard Tone or
DC Control detection (LOTL) optional
Power Input: 13.5 VDC, 3.5A max or 95 to 250 VAC,
47 to 440 Hz 64 watts max
Battery: 11.5 to 15 VDC, 3.5A max
Aux Output: 4-Form C contacts rated
0.5 Ampere
4-Open collector outputs rated
0.25 Ampere
Aux Inputs: 8-TTL inputs (0-5 VDC)