ZETRON 4000 Series, Installation Manual

Page: 132 / 418

Wireless Interface Options
132 025-9533Y
Harris M7100 Wireless Interface Option
Overview
The Zetron Series 4000 Harris Wireless Interface Option is designed to allow an
IntegratorRD console to interface to a Harris M7100, Jaguar J725M, or an Orion radio.
The Harris Wireless Interface Option consists of a Dual Channel (Orion) Wireless Control
Card (P/N 950-9867), which can interface with two radios. Each radio needs one Zetron
Orion Wireless Interface Module (P/N 950-9868). The Dual Channel Card is installed in
the Series 4000 Common Control Equipment (CCE) rack. The interface module and the
radio should be located within 1000 feet (300 m) of the CCE rack. Each interface module
is provided with a cable to connect the radios (P/N 709-7937). See Figure 31 .
Figure 31: Series 4000 Harris Wireless Interface Option Components
The Harris Wireless Interface Option may be added to existing IntegratorRD console
systems with the addition of the Dual Channel Wireless Control Card, the Zetron Harris
Wireless Interface Module (WIM), and software upgrades to the Console Interface Card
and the console itself. Adding the Harris capability to an existing system will have no
effect on the existing channels. All other operation of the console is unaffected.
Common Control
Equipment
IntegratorRD
Console
Dual Channel Wireless
Control Card
Punchdown
Block
Orion Wireless
Interface
Module
Orion Wireless
Interface
Module
Orion
Radio #1
Orion
Radio #2
709-7437
Installation Specific
(up to 1000 feet/300 m)
709-0004