Zetor UTILIX HT 45, Operator'S Manual

Page: 86 / 138

4. Ensure that the fuel filter base is clean. Push a new fuel filter fully into the fuel filler base.
5. Hold the fuel filter in place. Fit locking ring into position. Rotate the locking ring clockwise in order to
fasten the fuel filter to the fuel filter base.
6. Open the fuel supply valve (If equipped).
Important: Never use petrol (gasoline) thinner or similar inflammable material to wash the
primary fuel filter. After replacing the filter always bleed the system.
Hydraulic oil filter and engine oil filter cartridge
1
- Transmission oil Filter
Remove the filter with a filter wrench. To replace, apply oil
or grease on the seal, fit by hand until seal contacts bare,
then turn it 2/3
rd
turn further to tighten it check for leaks.
U18N082
1 - Engine Oil filter
U18N083
LUBRICATION & MAINTENANCE
85