background image

PRIMOHT20NC_0004

1

- U.S. Environmental Protection Agency EPA Regulation - Use low sulfur fuel

2

-

WARNING

- Do not refuel the tractor if you are smoking or if there is an open fire or spark nearby. Always

stop the engine before refuelling.

3

-

WARNING

- Start the engine only when you are sitting in the driver's seat. If the safety start switch is

bypassed, the engine can be started with the gear engaged.
Do not connect or short-circuit the leads on the starter coil.
Connect the auxiliary power cables as indicated on the battery plate and in the operating and maintenance
manual.
Starting with the gear engaged will cause the tractor to start driving and can result in serious injury.

4

-

WARNING

- Always apply the parking brake when parking. Failure to follow this instruction may result in

accidents and injuries.

5

-

WARNING

- Extensions, alterations, cracks, damage or corrosion to this structure may adversely affect

the functionality of the ROPS.

6

- The tractor may unexpectedly overturn much faster than the driver is able to jump out of it.

1. Never operate a tractor without a ROPS protective frame.

2. Always use the seat belt at the same time as the protective frame.

3. Do not pull the top of the protective frame towards the rear, the tractor may overturn.

4. Do not operate the tractor on steep slopes or in off-road gradients.

5. Do not turn sharply when driving at high speed.

7

- Always hold the steering wheel while driving.

8

-

WARNING

- There is a risk of injury or death if the tractor is used with a protective structure folded down.

Only use a tractor with a folded protection frame when absolutely necessary.
Do not use the seat belt when operating the tractor with the protection frame folded down.

GENERAL INFORMATIONS

33

Summary of Contents for PRIMO HT 20 NC







































































































































Reviews: