Zetor FORTERRA HSX 100, Operator'S Manual

Page: 39 / 250

40
ACQUAINTANCE WITH THE TRACTOR
F_02_18 F_02_19 F_02_20
FAST COOLING OF THE SPACE OF
THE CABIN
Proceed accordingly:
1 - Switch the heating valve control lever
(A) to the position to the left
2 - Set the air circulation in the cabin lev-
er (D) to the position of outer air suck-
ing
3 - Select an applicable gear of the venti-
lator run (position 1, 2, 3) by ventila-
tor control (B)
4 - Switch the air-condition system by a
switch (C)
5 - Set expiration under the requested
angle so that direct fanning of people
in the cabin does not occur (the pos-
sibility of illness due to intensive cool-
ing of parts of body).
OPERATION OF HEATING OR AIR-
CONDITION WITH TRACTOR´S WORK
With engaged inner recirculation of air is
the inflow of fresh air closed and there is
foul air in the space of the cabin by oper-
ator. This state can cause the feeling of
fatigue and there can also be penetration
of dust to the cabin because of the loss
of surplus pressure.
Note:
Set the control (D) according to in-
dividual requirements on temperature to
the position between (a) and (b) so that
the ventilator sucks the air from the out-
side of the cabin through filters, when
working.
IMMEDIATELY AFTER COOLING THE
CABIN
Immediately after cooling the cabin and
lowering the inner temperature on the
required values, we recommend the fol-
lowing:

Do the continuous regulation of the air
temperature with air condition on by
opening the heating valve (A). The air
entering the cabin from expiration is
not so intensively dried with this set-
ting.

Continuous temperature control with
air-condition on can be also done by
lowering the output of ventilator by
switching the control (B) to position 1
or 2.