Zetor COMPAX CL 25 NC, Operator'S Manual

Page: 49 / 108

Range Shift Lever (Road / Reduced)
The range shift lever allows two speed ranges, L (low) and H (high), and is located on the left side of the
operator's seat.
Before moving the range shift lever, the tractor must be stopped and the clutch depressed.
Use the range shift lever to select the L, H speed range to suit your application.
1 - Range Shift Lever (Road / Reduced)
2 - Scheme of Shifting Speed Ranges H / L
Important: Avoid damage! Select the correct speed range and gear for the relevant
application.

The machine can be operated in any gear with engine speeds at 1,350 - 3,000 rpm.
Within these limits, the motor can be operated at varying loads.

Never overload the engine by towing the machine at low speed.

Increase the engine speed to match the expected load. If there is a slight increase in engine
rpm simultaneously with moving the hand throttle lever forward, the engine is not overloaded.
Differential Lock Pedal
The differential lock pedal is located on the left side under the seat.
When the wheels slip, activate the differential lock by pressing the differential lock pedal.
To release it, take your foot off the pedal.
1 - Differential Lock Pedal
CONTROLS, INSTRUMENTS & OPERATIONS
48