Zeta ZiFiSense WDZ3ZT92, Instruction Manual

Page: 9 / 16

WDZ3ZT92
9

Adhesive device
Take the appropriate amount of 3M adhesive, attach it to the back of the
sensor, remove the protective film of the 3M adhesive, and install the
device to the specified position.
6.3. Cable Ties
6.3.1.Auxiliary material
No. Materials Quantity
1 Metal cable ties
（
5*300mm) 2
2 Slotted screwdriver, utility knife
6.3.2.Installation instructions

Open the device case
Use a slotted screwdriver to open the top cover from the bottom edge.
power socket