PBTA-200 User Manual
Issue #1 Issue Date XX/XX/XXXX Revision #1
1 Introduction
The PBTA-200 push button temporary fire alarm is activated immediately by pressing the
“mushroom” button fixed to the front of the device. Once activated the unit will sound & flash.
It can be used as a standalone alarm or interconnected in series.
2 Power Supply
The unit is powered by 8 AA batteries.
3 Typical Wiring Diagram
The following diagram shows 3 units connected in series where one alarm activation will trigger
all connected units.
Section 1
Introduction /
Section 2
Power Supply /
Section 3 Typical Wiring Diagram
/
Fig.1
3