Zesto Audio 2021 Page #8
Power Supply, Dual Chassis
ESP Supply (Energy Source Power Supply)
Front
(not in photo)
Front Power Supply LED Light………………………………
Yellow = Standby; Red = main unit is On
Front Rocker Power Switch……………………………………...Turns the Power Supply to Standby
(Power switch on front of main unit for On)
Rear
(reading left to right)
IEC Power Entry Connector…….………………………………110V - 120V AC power input
(Optional factory installed 220V -240V, 50/60Hz mains)
Mains fuse…………………………………………………………Located in drawer of Mains IEC connector
Mains Fuse 110V–120V …………………………………………5mm x 20mm-1A slow blow
Mains Fuse 220V–240V………………………………………….5mm x 20mm-0.25A slow blow
Fuse 1…………………………………………………………… 6mm by 32mm, 4Amp Slow Blow Fuse
Fuse 2…………………………………………………………… 6mm by 32mm, 0.75Amp Slow Blow Fuse
Fuse 3…………………………………………………………… 6mm by 32mm, 0.25 Amp Slow Blow Fuse
To Phonostage…………………………………………………
Connect 3-meter umbilical cable to main unit
