24
LOCK function
By activating this function all the keys are deactivated to prevent un
-
wanted modifications of the operating settings.
5"
Activate the function by pressing the
button for at
least 5 seconds.
The key symbol lights up on the display and the keys
are locked.
5"
Deactivate the function by pressing the
and
buttons simultaneously for at least 5 seconds.
The key symbol turns off, the buttons work again.
8. t
eMPerature
control
The electronic temperature control is based on the value that the user assigns to the COMFORT temperature.
The temperature values for the Comfort-1, Comfort-2, Eco and Antifreeze modes are automatically calculated and can
not be directly modified by the user. The reference temperature is always indicated on the display together with the
symbol representing the selected operating mode.
NOTE: The temperature measured by the sensor inside the product always indicates the ambient temperature in the
immediate vicinity of the product and may differ from the temperature measured with other instruments in other areas
of the room. This difference may depend on various factors, such as:
- The installation position: some areas of the room may be affected by currents or warm air pockets that can change
the sensor measurement;
- The installation on an external perimeter wall, which is normally colder than internal walls, may result in a lower tem-
perature measurement than the actual room temperature;
- Unstable conditions: each evaluation must be made under stable operating conditions. For this reason the Comfort
temperature should not be changed before 60 minutes have elapsed since the previous modification. In fact, it is not
possible to assess whether the room temperature is correctly maintained by the product if the temperature level is
continuously modified in a short period of time.
If the difference between the set temperature and the ambient temperature is detected in stability conditions, calculate
this difference and then increase or decrease the comfort temperature level on the product of the exact calculated
difference value.
