Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: 01352 752555 option 1
or email:
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit.
Lisa Table is now complete.
1.
Position Leg B (Fig.1a) and attach to Table Top A using 2no Hex Bolts and ‘T’ Nuts.
Ensure correct orientation of Hex Bolts and ‘T’ Nuts (Figs.1a & 1b).
Repeat procedure for remaining Legs B.
2.
Position Diagonal Bracing C 125mm (nom.) from base of Legs B (Fig.2a) and attach
using 4no Screws.
Ensure all Bolts are fully tightened.
