www.zest4leisure.co.uk | 01352 752555 option 1 | [email protected]
Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, Tape Measure. 3mm
Drill Bit required in order for you to drill all screw holes before construction.
1. Position Rafters B at both ends of Rails A and fix using 4no 60mm Screws – 2no per Rafter (Fig.1a).
Space out remaining Rafters B evenly (Fig.1b) and attach using 6no 60mm Screws.
2. Locate Post/Trellis Assembly C onto Rails A as shown in Fig.2a (adjust width to suit). Fix in position
using 2no 60mm Screws – 1no per side (Fig.2b).
Repeat procedure for remaining Post/Trellis Assembly.
3. Ensuring Post/Trellis Assembly C is perpendicular to Rails A, position Bracings D as shown in
Figs.3a & 3b and fix using 4no 50mm Screws – 2no per bracing.
Repeat procedure for remaining bracings.
Sunset Arch is now complete.
