Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Philippa Table is now complete.
1.
Attach 2no Rails B to Leg Assemblies A using 4no 160mm screws (2no per rail).
(See Figs. 1a & 1b)
2.
Locate Table Top C onto leg assembly (See Fig. 2a), and fix in place through
underside of rails using 10no 120mm screws (2no per short side & 3no per long
side). (See Figs. 2b & 2c)
