Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Philippa Bench is now complete.
1.
Attach 2no Rails B to Leg Assemblies A using 4no 160mm screws (2no per rail).
(See Figs. 1a & 1b)
2.
Position Back Board C centrally into the cut outs on Leg Assemblies A and fix
using 2no 60mm Screws (1no per side (Upper)) and 2no 70mm screws (1no per
side (Lower)). (See Fig. 2)
3.
Locate Seat Assembly D onto bench assembly and fix in place through underside
of rails using 10no 120mm screws (2no per side rail & 3no per front & back rail).
(See Figs. 3a, 3b & 3c)
