Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: 01352 752555 option 1
or email:
Assembly requires 2 persons. Tools required: 4mm Hex Key, Corded / Cordless
Drill & Pozi-drive Bit / Screwdriver, 3mm Drill Bit
1.
Position Seat Assembly A and Back Assembly B as shown in Fig.1a ensuring that
bolt holes are correctly aligned and attach using 2no Hex Bolts and ‘T’ Nuts.
Ensure correct orientation of Hex Bolt and ‘T’ Nut (Figs.1c & 1d).
Do not fully tighten at this stage.
2.
Place RH Armrest C onto Back/Seat Assembly (Fig.2a), ensure all bolt holes are
aligned and attach using 3no Hex Bolts and ‘T’ Nuts (Figs.2b, 2c & 2d).
Repeat procedure for LH Armrest D.
Fully tighten all bolts at this stage.
Invert chair assembly and place on flat surface. Position 2no Diagonal Bracings
to seat and right hand Armrest Assembly C and attach
using 4no 50mm screws (2
per bracing)
as shown in Fig.3a
Repeat procedure for remaining 2no Diagonal Bracings on left hand side of chair
(Fig.3b)
1b
1a
www.zest4leisure.co.uk