Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Harriet Park Bench is now complete.
1.
Attach 1no Leg Assembly A to the end of Bracing B using 1no 90mm screw.
Repeat Procedure on opposite end with remaining Leg Assembly A. (See Fig. 1)
2.
Position Seat Slat Assembly C centrally onto seat assembly (See Fig. 2a) (if
necessary equally space slats) and fix using 24no 40mm screws (2no per slat,
1no per side). (See Figs. 2b & 2c)
3.
Remove backing strip from Seat Slat Assembly C. (See Fig. 3)
