Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Hex/Allen Key, Flat/Slotted Screw Driver, 10mm Spanner.
Emily Seat is now complete.
1.
Position Seat Assembly A between Side Assemblies B as shown in Fig. 1a. Align
bolt holes and attach using 4no 105mm Bolts with Washers and Nuts as shown in
Fig.1b.
Do not fully tighten at this stage.
2.
Insert 4no Cross Dowels into 10 mm holes to rear of Back Assembly (C) ensuring
slots face outwards (as shown in Fig 2a). Position the Back Assembly between
side assemblies (Fig 2b) and insert 2no bolts per side and carefully thread bolts
into cross dowels, (Figs 2c & 2d).
Fully tighten all Bolts at this stage.
