Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Chicken Starter Coop is now complete.
1.
Fix Side Panels A to Floor B using 4no 60mm Screws
– 2no per Side Panel A
(Fig.1).
2.
Locate Front Panel C between Side Panels A and fix to Side Panels A using 6no
60mm Screws
– 3no per side (Fig.2)
3.
Attach Internal Panel D to the batten of Front panel C as shown in Fig.3a using
3no 60mm Screws. Further Attach Internal panel D to Flood Panel B as shown in
Fig.3b using 2no 60mm Screws.
4.
Attach Back Panel E to Side Panels A and Internal Panel D Using 9no 60mm
Screws
– 3no per Side panel E and Internal Panel D.
5.
Attach Handles F to Side Panels A, flush with Back Panel E using 4no 60mm
Screws
– 2no per Handle F.
6.
Attach Roof Panel G to battens of Side Panels A and Internal Panel D using 6no
60mm Screws as shown in Fig.6