Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Caroline Bench with Storage Box is now complete.
1.
Position Seat Assembly A between Side Assemblies B and attach using 4no
90mm Screws (2no per side). (See Fig.1)
2.
Position Back Assembly C between Side Assemblies B and attach using 4no
90mm Screws (2no per side). (See Figs. 2a & 2b)
3.
Position 1no Box Panel D to the front of seat assembly, beneath seat and
between legs and attach through legs using 4no 90mm screws (2no per leg).
(See Fig. 3a)
Repeat procedure on back of seat assembly, ensuring panel follows angle of
back legs. (See Fig. 3b)
4.
Insert Box Base Panel E between box panels and fix using 6no 60mm screws
(3no per front & back). (See Figs. 4a & 4b)
5.
Place Seat Infill F into Seat Assembly A. (See Fig. 5)