background image

 

11

 Unplug the power cord.

Remove   the   inlet hose and clean 
the filter with a brush.

Clean  the  surface of 
the washing machine 
with a    soft    cloth 
regularly.                         

Clean the inner tub 
regularly, especially after 
washing starched or 
bleached laundry.

 
Press down each button within 5 minutes since the program will reset the process group. Then press down 
STRAT/HOLD button to re-start the washing machine. If not, the washing machine will shut down 
automatically. 
Close the lid, or the washing machine will not operate.  

In case the unbalance of load triggers the safety switch when spinning, the washing machine will 
automatically refill water to adjust the balance. 

 
Note: 

 

Clothes easily discolored should be washed separately so as to prevent inter-dyeing. 

 

If you want to change a selected program, please press the START/HOLD button first, then press 
the Program button before pushing START/HOLD button. 

 

When Rinse & Drain program is ON, do not use detergent. 

 

If you want to drain water during washing, press the START/HOLD button, then select Rinse and 
Drain program. Press START/HOLD button again to restart. 

 

DELAY START SETTING 

Select this course when you have to go out or do something else. 

 

Press down the power button. 

 

Load the washing machine and select the appropriate wash program. 

 

Press PRESET button continuously to select the delay start time. (From 1 hour to 24 hours) 

 

Close the lid completely. 

 

Press START/HOLD button to start the course. 

 

CHILDREN-PROOF SETTING 

Select the function, the program will hold the washing machine and give out alert voice once the lid is 
opened when washing. And the washing machine will automatically drain water and give alarm if the lid 
is not closed in 10 seconds. In case a child falls into the washing machine when he plays around, he 
will be in safe status. 

 

Press down the power button. 

 

Select the appropriate program and press START/HOLD button to start the washing machine. 

 

The washing machine buzzer will give out music and the digital indicator show

. This time you 

must decide whether to select the function or not. 

 

Press the PRESET button to select the function and the dot indicator will be ON. If no, don’t do 

anything. 

NOTE: If you open the lid while the machine in running, all operations will be stopped within 7 seconds. 
To resume operation, close the lid. 
 

CARE AND MAINTENANCE 

 

¾

 

CLEANING YOUR PORTABLE WASHER 

 

Clean the surface of your portable washer regularly with soft fabric. 

 

Clean the inner tub regularly, especially immediately after starch or bleach operation. 

 

Clean the filter in the inlet valve or inlet hose regularly in order to prevent it from clogging. 

 
 
 
 
 
 
 
 
 

Summary of Contents for XQB55-526















Reviews: