12
ZEROTECH
- INSTRUCTION MANUAL
VG1624-IR_V1_int. 10/2021
rifle by shooting from a bench. If you predominately shoot your rifle in the prone
position, zero your rifle from the same position.
Before you fire your first shot,
you should bore sight your rifle to ensure your scope and
your barrel are both aligned at the intended point of impact on your target.
To do this with a bolt action rifle, remove the bolt with the rifle securely supported (front
and rear) and align the bore with the target. Without disturbing the rifle, carefully look
through the scope and check that the reticle is also aligned with the same point as the
bore on the target. If the reticle is not aligned, use the windage end elevation adjustments
on your scope to adjust the reticle to the intended point of impact on the target.
Once you are satisfied that the scope and the bore of your rifle are aligned to the same
point on the target, fire a shot at the target and observe the point of impact (bullet hole).
