Zeroplus X One SE, Manual

Page: 10 / 22

Remap Function
Function Settings
Buttons that can be Remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB and 4
paddles for the Xbox One Elite Series 2 itself(hereinafter referred to as FK).
Step 1. Choosing a FK button ：
Press the “Remap button” and FK button at the same time. The LED of the
controller will turn off.
Step 2. Choosing button to be set
：
Press all keys that need to be assigned to FK at the same time and the controller
will vibrate. When all keys are released, the LED will light up again to indicate
successful setup.
EX: If you press "Remap button" and "A" button at the same time, then release
the button and press X+Y button, the "A" button will be set to X+Y.
Cancelling Function

Cancellation of single button remap function:
Press the "Remap button" and the FK button with the Remap function, release it
and press the FK button again to redefine the FK function.
EX: If you press the “Remap button” and the “A” button that has been set to X+Y
at the same time, release the button and press the A button again, then the X+Y
setting on the “A” button will be cancelled.

Cancellation of all button remap function:
Press and hold the “Remap button” for 2 seconds, the controller will vibrate 3
times to cancel all the settings.
About the use of paddles
When the Profile button on the Xbox One Elite Series 2 is toggled off, the 4
paddles on the back of the controller can be used as FKs. Note: You can set the
functions of other FKs to the paddles, but not the paddles to other FKs.