Zeroplus LAP-F1 User Manual Download Page 122

Page: 122 / 140

LAP-F1 Logic Analyzer

User Guide v1.6

| www.zeroplus.com.tw

122

Figure 4-73 Packet List / Found item highlighted

Figure 4-74 Packet List Settings

Item

Description

Bus Selection

Select the buses to be displayed; all are selected by default.

Packet Information

Packet #

Select the items to be displayed and their colors.

Name

Include the names of the packets.

Timestamp

Packet timing; the first being defined as zero.

Time Difference

Time difference from packet X to packet X-1.

Colors

Text

Change the text color; by default it’s white.

Auto Contrast Text

Color

Automatically select text colors that contrast their background

colors.

Background

Change the Packet List background color.

Unit

Change the time unit which is ms by default.

Summary of Contents for LAP-F1













































































































































Search results

Summary of Contents for LAP-F1

Reviews:

Related manuals for LAP-F1

Brands by name

Popular brands

Zeroplus LAP-F1, User Manual

Search results

Summary of Contents for LAP-F1

Reviews:

Related manuals for LAP-F1

Brands by name

Popular brands