LAP-F1 Logic Analyzer
|
User Guide v1.6
| www.zeroplus.com.tw
120
A light blue frame (in the left part of Figure 4-71) in the Navigator indicates which
part of the waveform that is in focus; this frame naturally changes size when
zooming as it is inverse proportional to the zoom rate. Four signals are shown at a
time; scroll up or down to focus on other channels.
The Navigator is show by default under the waveform area in the Secondary Display
area; see Figure 4-71.
Figure 4-71 Navigator window example showing the AC97 protocol
4.53.
Packet List
The Packet List shows all the acquired packets in their decomposed form. By
presenting the packets in list form, the Packet List facilitates observation and analysis
of all packets and their relation. Only packets under a protocol decoder can be
displayed. The Packet List is located in the Secondary Display area; see Figure 4-72.
If packet in the Packet List is double-clicked, the waveform display focuses shifts
focus to the location of that packet. On the contrary, double-click the waveform of a
packet, the packet list also jumped to the location of the packet, and with the red box
prompts, its packet guild grey light show.
