04
ㅣ
Anytime Anywhere, The Fresh Air for Me
ZERONA
USER MANUAL
ㅣ
05
1. Cover removal
• Grasp both sides of the top of the product and lift it slightly.
2. Separation of sterilizer
• Hold the sterilizer set with both hands and turn it counterclockwise to separate the sterilizer.
• Our sterilizer set is designed to be separated from the HEPA filter.
• When replacing the sterilization lamp in the sterilization device, please replace
the HEPA filter as well.
* When it comes to replacing the sterilization lamp, a voice message prompting you to replace
the sterilization lamp is guided through the speaker.
3. Tripod stand
• The tripod mount is shipped with this product. After receiving the product, you can use it
by placing it on the tripod stand.
Sterilization lamp replacement and mounting
(The COVID-19 sterilizing substance generator is attached to the filter.)
When cleaning the filter and replacing the sterilization lamp, follow the steps below.
Sterilizer
bracket
COVID-19
sterilization
equipment
Sterilization
lamp
replacement
and
mounting
1. After removing the cover,
remove the connector as well.
2. Turn the combined sterilizer set
counter-clockwise to separate it.
3. Loosen the screw connected
to the filter.
5. Remove the two screws on the top
cover of the sterilizer and separate
the top cover and the sterilizer.
4. Remove the sterilizer and filter.
6. Disconnect the connector from
the sterilizer.
Component
and
Part Names
How
to
Install
Cover
HEPA Filter
Cleanliness Indicator
Mood Light
Control Panel
Tripod Holder
Air Intake
Body
Air Outlet
H 299mm
(When using
tripod mount)
W 270mm
Speaker
Power Terminal
Air Intake Port
Tripod Holder
Coupling
Fan Hole Inlet
Safety Guard
Safety Switch
Main Body
HEPA Filter
Filter/Sterilizer SET
Tripod
Holder
Remote
Control
Power
Adapter
Leaflet
Manual
