To Charge your USB devices:
Set the variable control ring to position 2. Untwist the USB cover, locate the
USB output port
. Plug in your mobile USB device and charging cable and
press on the tail-cap switch to
activate
. You can use both 18650 and CR123 batteries to charge your mobile devices.
LED Power Indicator Light:
The LED indicator can be used to determine current power remaining. Blue
LED indicates a charge of 100% to 50%, red LED indicates 50% to 25% and a blinking red LED light means
less than 25% remaining. At 10% the Relic XR will turn off completely due to the automatic activation of
over-discharge protection.
Recharging your Relic XR:
You can recharge your 18650 batteries through the Micro-USB port using the
supplied Micro-USB power cable. We recommend using a standard 5V 1A USB AC adapter, similar to the
kind that is used to charge your mobile phones. Note: You cannot recharge RCR123 or standard CR123
batteries using this method. Insert the Micro-USB cable and
press on the tail-cap switch to complete
the circuit and activate recharging. The blue LED indicator light will blink when charging and stop
blinking when charging is complete.
If power is suddenly lost while recharging (e.g. power outage) or
the cable is removed, the flashlight will automatically activate the hidden beacon mode so that you can
locate the flashlight in the dark.
CLEANING AND MAINTENANCE
We recommend that you clean your ZeroHour flashlights regularly.
Wipe the threads and O-rings with a clean, lint-free cloth, and apply a thin coat of non-conduction
silicone or petroleum-based lubrication. When the O-rings show signs of damage or are worn out from
normal wear and tear, replace them and give ZeroHour a new coat of flashlight lubrication.
