The Tee-Up Instructions
Page 2.
Jaws
Stabiliser Tube
Note:- The ‘Tee-Collector’ purposely not shown attached to tube
just for clarity! - See page 5
Dedicated Loop
Loading the Tee-Up
1. With the Jaws of the device open (trigger released) simply place the golf
ball between the jaws and allow it to lay on top of the black Stabiliser Tube.
You may find laying the end of the Tee-Up onto your golf bag helps provide
additional stability when loading the device.
2. With your other hand take a tee and insert it between the jaws and push
it up against the ball. Now close the jaws together using the trigger. To
ensure the tee-peg will set easily into the ground check that the tee-peg is
pushed up against the ball and that it is in a vertical position. The device is
now loaded and you are ready to Tee Up the Ball.
Teeing Up the Ball
1. Whilst holding the trigger vertically press the tee into the ground to the
desired height. Slowly release the trigger to open the jaws and whilst
keeping the foot of the tube placed on the ground allow the ‘Stabiliser’ to
rise slowly until it is clear of the ball. The stabiliser allows you to maintain
absolute precision.
2. When clear of the ball you are now in position to gently move the jaws
sideways
away from the ball and thus completing the procedure.
