Zero88 Zero88, User Manual

Page: 17 / 40

ELARA 73-710-00 Issue 3
Page 15
Preset Mode
Storing and Cross Fading Scenes
1. Set the A MASTER and Grand
MASTER to full and the B MASTER
to zero. Set the CROSSFADE control
to manual.
2. Ensure that the lights next to the
PRESET CONTROL button indicate
A FADERS, B STORED
3. Set up a scene using the PRESET A
and PRESET B faders. This scene
will be output.
4. To store the scene press the
PRESET CONTROL button. The
output levels are temporarily stored
and the lights next to the PRESET
CONTROL button change to indicate
B FADERS, A STORED. The A
MASTER is now assigned to the
stored scene and the B MASTER
assigned to the PRESET faders, so
the outputs remain the same.
5. Set up the next scene using the
PRESET A and PRESET B faders.
(The outputs are not affected since
the B MASTER is currently at zero).
6. To crossfade between the stored
scene and the scene on the PRESET
faders, simultaneously move the
A MASTER to zero and the B
MASTER to full. A dipless crossfade
will occur.
7. If the PRESET CONTROL button is
pressed again, the output levels are
saved into the temporary store
(overwriting the previous values) and
the lights next to the PRESET
CONTROL button change to indicate
A FADERS, B STORED. The B
MASTER is now assigned to the
stored scene and the A MASTER
assigned to the PRESET faders, so
the outputs remain the same.
8. The operations described in
steps 5 - 8 can then be repeated to
set up a new scene on the faders,
crossfade to the new scene, and save
it to a temporary store etc.