12
Launching your Raven drone
1.
After installing a fully charged battery and installing 4 x AA batteries
(AA batteries not included) into the remote control and conducting a
complete check of your surroundings, turn the Power Switch (3) on the
Raven drone to the ON position.
2.
Once on, the LED lights on the arms of the Raven drone should flash
signalling a connection to the Remote Control. Place the Raven drone on the
ground facing away from you and move back three metres.
3.
With the Left Thumbstick (Acceleration/Yaw) (2) in the lowest (down
position power on the remote control (1). The remote should beep once to
indicate power up has been successful.
4.
To activate the connection between the remote and the Raven drone,
move the Left Thumbstick (Acceleration/Yaw) (2) on the Remote Control
to the highest (up) position. Hold for one second and then return the Left
Thumbstick (Acceleration/Yaw) (2) to the lowest (down) position.
The remote should beep again, the lights on the arms of the Raven drone
should shine solid and the onscreen display will show the Rotor Blades
spinning, indicating that the connection has been successful and the drone
is ready to fly.
