Zero Motorcycles FX 2022, Owner'S Manual

Page: 37 / 164

Controls and Components
3.17
Bluetooth® Pairing
The following steps must be taken to properly pair a
Bluetooth®-equipped smartphone with your motorcycle.
1. Ensure that the motorcycle is not Armed. The motorcycle
must be keyed ON, the kickstand must be in the down
position, and the run switch must be in the Stop position.
2. Press and hold the Mode button on the right handlebar for a
minimum of 5 seconds until the Bluetooth® symbol on the
dash begins to blink, then you may release the Mode button.
3. Your motorcycle will be discoverable with the Bluetooth® ID
of ZeroMotorcyclesXXXXX (XXXXX refers to the last 5 digits of
the motorcycle’s VIN).
•
For iOS devices, go to the Settings application on your
smartphone and locate the Bluetooth® menu and pair with
your motorcycle
•
For Android devices, go to the Settings tab in your Zero
Android application and choose the button with the
Bluetooth® symbol
Note: When the Bluetooth® indicator on the dash display is
solid, your motorcycle and smart phone are paired over
Bluetooth®.
Zero Owner's Manual (FX and FXS).book Page 17 Thursday, May 13, 2021 10:53 AM