Desk Operation
Separate scenes are set up on PRESET A and
PRESET B using the individual channel faders.
The A MASTER and B MASTER faders are used to
crossfade between scenes. The two FADE TIME
controls determine the A and B fade times
independently. Overall output is under the control of
the GRAND MASTER.
To Output a Scene from Preset A Only
1
Set the A MASTER and B MASTER to zero (0%),
and the GRAND MASTER to full (100%).
2
Set the required levels for each channel on the
PRESET A faders.
3
Set FADE TIME A control to the required value.
4
Move the A MASTER to full. The scene set up on
PRESET A fades up in the specified time.
To Output a Scene from Preset B Only
1
Set the A MASTER and B MASTER to zero (0%),
and the GRAND MASTER to full (100%).
2
Set the required levels for each channel on the
PRESET B faders.
3
Set FADE TIME B control to the required value.
4
Move the B MASTER to full. The scene set up on
PRESET B fades up in the specified time.
Manual Fading between Scenes
1
Ensure that the FADE TIME A and FADE TIME B
controls are both set to 0.
2
Set the A MASTER and B MASTER to zero (0%).
3
Set up a scene using the PRESET A faders.
4
Set up a different scene on the PRESET B faders.
5
Set the A MASTER to full. The scene set on the
PRESET A faders will be output.
6
To crossfade to the scene set up on PRESET B,
simultaneously move A MASTER to zero and
B MASTER to full. The operator has direct control
over the speed of the scene change. As the
master faders are moved in tandem the scene set
up on PRESET B will fade in and the scene set on
PRESET A will fade out. The crossfade is dipless.
7
A new scene can then be set up on PRESET A
without affecting the outputs.
8
To crossfade to the new scene on PRESET A,
simultaneously move the A MASTER to full and
the B MASTER to zero. As the master faders are
moved in tandem the scene set up on PRESET B
will fade out and the scene set on PRESET A will
fade in. The crossfade is dipless.
Timed Crossfades between Scenes
1
Set the A MASTER and B MASTER to zero, and
the GRAND MASTER to full.
2
Set up a scene using the PRESET A faders.
3
Set up a different scene on the PRESET B faders.
4
Set the FADE TIME A and FADE TIME B controls
to the times required.
5
Quickly move the A MASTER to full. The scene
on the PRESET A faders will fade in and be output
live. (The time taken for the fade to complete is
determined by the value set on the FADE TIME A
control).
6
To crossfade to the scene on PRESET B, quickly
move the A MASTER to zero and the B MASTER
to full. The scene on PRESET B will fade in and
the scene on PRESET A will fade out in the
selected times.
7
A new scene can then be set up on PRESET A
without affecting the outputs. Adjust FADE TIME A
if required.
8
To crossfade to the scene on PRESET A, quickly
move the A MASTER to full and the B MASTER
to zero. The scene on PRESET A will fade in and
the scene on PRESET B will fade out in the
selected times.
Flashing Channels
1
Ensure that the FLASH FUNCTION is active (the
light in the FLASH ON/OFF button is on).
2
Press and hold down an individual CHANNEL
FLASH button. The channel is added to the scene
at the level set on the GRAND MASTER.
3
Release the CHANNEL FLASH button. The
channel returns to its previous level.
7371200P2/v1
PAGE 3
Desk Operation
