Zero 88 Lighting Ltd. DMX DeBug Manual
7 / 32
OVERVIEW
The six front panel buttons operate DMX DeBug. The buttons function
as follows:
MENU
The MENU key is used to select the operating mode of DMX DeBug.
Pressing MENU once will display the currently selected mode. The
LEFT and RIGHT cursor keys are then used to select a new operating
mode. Pressing MENU a second time completes the process.
The MENU Key is held down whilst power is switched on to access the
Setup Menu
TOGGLE
When DMX DeBug is in DISPLAY RECEIVED DMX512, the TOGGLE
key is used to step through the different display formats (bar graph,
percent, decimal etc.).
In TRANSMIT mode, the TOGGLE key is used to invert the level of the
selected channel.
In TRANSMIT LAMP mode, the TOGGLE key selects each of the
automated tests in sequence.
LEFT RIGHT
When DMX DeBug is in DISPLAY RECEIVED DMX512, the LEFT and
RIGHT cursor keys are used to select a new base address.
In TRANSMIT DMX512 modes, the LEFT and RIGHT cursor keys are
used to select a new transmit channel.
If DMX DeBug is displaying the menu, the LEFT and RIGHT cursor keys
are used to select the next operating mode.
UP DOWN
The UP and DOWN cursor keys are used to increment or decrement the
level of the displayed data.
T
H
E
C
O
N
T
R
O
L
S
U
R
F
A
C
E
