Zepter Z-993R, Instruction Manual

Page: 11 / 20

9
If you wish to use the Zepter Radio Digital Thermocontrol with the Zepter Radio Induction Cooker,
you need to pair them before cooking.
INITIAL PAIRING OF THE ZEPTER RADIO DIGITAL THERMOCONTROL
WITH THE ZEPTER RADIO INDUCTION COOKER
After purchasing the Zepter Radio Digital Thermocontrol, and for every additional device, the
following procedure needs to be performed:
REMOTE COOKING
• Plug the Zepter Radio Induction Cooker into the socket.
• Within 1 minute, turn on the Zepter Radio Digital Thermocontrol by
pressing the button for 1.5 seconds, then press again and hold
the button, until a yellow LED starts blinking slowly and the Zepter
Radio Induction Cooker beeps to confirm that pairing has taken
place.
• Make sure the Zepter Radio Induction Cooker makes the pairing sound
(beep).
• If the LED stops blinking, and the Zepter Radio Induction Cooker
does not beep, this means that the pairing has not taken place.
Switch the Zepter Radio Digital Thermocontrol off and then on
again to reattempt the pairing.
Once the pairing has taken place, the Zepter Radio Induction Cooker will memorize the Zepter
Radio Digital Thermocontrol and will only recognize the Zepter Radio Digital Thermocontrol
it has been paired with.
SUBSEQUENT PAIRINGS
Turn on the Zepter Radio Digital Thermocontrol and, before it goes into the Stand-by state,
press again and hold the button, until the LED starts blinking slowly and the Zepter Radio
Induction Cooker beeps. If you do not hear a beep confirming that the pairing has taken
place, you need to repeat the procedure.
If the Zepter Radio Digital Thermocontrol goes into the Stand-by state (fixed yellow LED) before
the pairing has taken place, you need to switch off and then on the Zepter Radio Digital
Thermocontrol to reattempt the pairing.
Please refer to the POWER BOOST section to set the power of the Zepter Radio Induction Cooker.
After setting the power of the Zepter Radio Induction Cooker, you can set the desired cooking
parameters as described in the Zepter Radio Digital Thermocontrol manual.
If both the cooking time and temperature have been set, the time countdown will start after the
set cooking temperature has been reached. The time countdown will start immediately if the
cooking temperature has not been set. In the latter case, once the set time has elapsed, the
Zepter Radio Digital Thermocontrol will turn the Zepter Radio Induction Cooker into the Stand-
by state. After 30 minutes, the Zepter Radio Induction Cooker will switch off automatically.
NOTES:
• If in 30 minutes after pairing the cooking process has not been initiated, the Zepter Radio
Induction Cooker will unpair itself from the Zepter Radio Digital Thermocontrol and will turn off.
• If at any time during the cooking process the Zepter Radio Digital Thermocontrol is turned
off, it will unpair from the Zepter Radio Induction Cooker.