4
5
Applications/handling
Wrist movement
Whilst processing, use a light swivelling motion from the wrist
draw MixSy up a little and let it fall again on the ingredients (do
not press or pound). The fineness of the result depends on the
length of processing.
Drawing up
Rest the MixSy for a few seconds on the bottom of the jug. Then
hold it at an angle and draw it up slowly against the side of the
jug. When the ingredients no longer are drawn with it put it back
on the bottom and repeat the process until the ingredients are
whipped to the required stiffness.
Blending
Dip MixSy at an angle to the ingredients, switch it on and blend.
Before removing the appliance from the ingredients. Switch it
off to prevent splashing.
Tip whilst working: hold your free hand over the top of the jug
to prevent ingredients spraying out.
Switch positions
Speed I for all light airy dishes and small amounts.
Speed II for all viscous, firm ingredients and large amounts.
Working parts
Mincer
Chops up, minces, purees raw and cooked vegetables, fruit
berries, baby food, cooked meat, frozen fruit for fruit ice-cream,
jam, and even crushes ice-cubes. Blends soups and sauces.
Mixes cake and pancake doughs. For all heavy ingredients.
Beater
Beats, whips. blends egg-whites and cream. Is used to whip up
soups and sauces. For everything which should be light and
fluffy.
Whisk
Stirs and mixes shakes, drinks, purees, salad sauces, mayonnaise.
For all mixtures with a thick or creamy consistency.
Meat-mincer
Cuts, chops and minces meat (raw or cooked), as well as
vegetables with coarse fibres.
Please push cutter blade into shaft until small pin on shaft and hole of cutter blade
are connected as in image shown.
Recommended usage time: 5 minutes
Please switch the appliance off for 10 minutes after 5 minutes of uniterrupted use.
Attention! Never immerse main body in water or other liquids. Only metal
blending shaft is deigned for immersion in to liquids.
EN
Putting on and changing the attachments
Push the attachment as straight as possible on to the stub in
such a way that the drive pin on the stub fits exactly into the
small recess in the socket of the attachment. The attachment is
designed to make this process easy. The attachment is removed
by simply pulling it off from the stub.
Caution:
Make sure the appliance is switched off, the
motor has stopped completely and the MixSy is unplugged
from the mains before putting on or taking off attachments.
Attention! Blades of all accessories are SHARP! Handle carefully when removing,
inserting and/or cleaning.
