_
English
_
MAIN COMPONENTS
1.
Electronic variable browning
control
2.
Cancel button
3.
Carriage control lever
4.
Defrost button
5.
Reheat button
6.
Crumb tray
MAKING TOASTS
1.
Put one or two slices of bread into the slots for bread toasting.
2.
Insert the power plug into the mains socket.
3.
Set the required toasting level using the knob.
4.
NOTE: Set the control knob to the needed position.
5.
Press the carriage control lever until it clamps.
6.
When the toasted slices are ready, the unit will be switched off automatically, the carriage
control lever will return to its initial position.
7.
To remove small toasts, carefully move the carriage control lever upwards.
<REHEAT> BUTTON
If necessary, you can warm up cold toasts. To do this, put the toasts into the slots for bread toasting
and press the carriage control lever. Press the <Reheat> button. In this mode you can warm up
toasts without additional browning.
<CANCEL> BUTTON
If you want to stop the process of toasting, press the <Cancel> button.
<DEFROST> BUTTON
To toast frozen slices of bread put them into the slots for bread toasting, set the required toasting
level with the control knob, press the carriage control lever until clamping and then press the
<Defrost> button.
CRUMB TRAY
The toaster is equipped with a crumb tray.
•
Switch the unit off and let it cool down.
•
Move the tray sideways to delink it from the unit body
•
Unfold the tray and clean it. Clean the inside of the toaster body from bread crumbs.
•
Close the tray.
CLEANING
•
Ensure that the toaster is unplugged before cleaning it.
•
Never place it in water or any other liquid.
•
To clean, UNPLUG THE TOASTER AND ALLOW TO COOL. Then remove the crumb tray
and clean it with soapy water. Maker sure the crumb tray is completely dry before installing it
