Zephyr Verona ZVO-E30AG, Use, Care And Installation Manual

Page: 15 / 45

13
SURFACE MAINTENANCE:
Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and
buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
Do not use any product containing chlorine bleach. Do not use “orange” cleaners.
Aluminum Mesh Filters
7KHDOXPLQXPPHVK¿OWHUVLQVWDOOHGE\WKHIDFWRU\DUHLQWHQGHGWR¿OWHURXWUHVLGXHDQGJUHDVHIURP
cooking. They need not be replaced on a regular basis but are required to be kept clean.
$IWHUKRXUVRIXVHWKHZRUGV³FOHDQPHVK¿OWHU´ZLOOLOOXPLQDWHRQWKHFRQWUROVFUHHQLQGLFDWLQJWLPHWR
FOHDQWKHDOXPLQXPPHVK¿OWHUV5HIHUWRLQVWUXFWLRQVRQSDJHRQKRZWRUHVHWWKHLQGLFDWRU)LOWHUV
may need to be cleaned more depending on cooking habits.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if
heavily soiled.
'U\¿OWHUVDQGUHLQVWDOOEHIRUHXVLQJKRRG
Removing Aluminum Mesh Filters
1. Push in on spring loaded handle
3XOOGRZQRQ¿OWHUKDQGHWRUHPRYH¿OWHU
6KRXOG¿OWHUVZHDURXWGXHWRDJHDQGSURORQJHGXVH
replace with following part number:
Hood Model: Part No. Qty to Order
ZVO-E30AG, ZVO-M90AG 50200045 2
Maintenance –
Hood and Filter Cleaning