background image

16

www.zephyronline.com

Baffle Filter Clean Reminder 

Whether your hood is installed as an exhaust or purifying unit, a set if baffle filters are fitted by the factory,  
These baffle filters are intended to filter out residue from cooking.  They need not be replaced on a regular 
basis but are required to be kept clean.  The filter clean reminder function in the microprocessor will 
automatically indicate by a flashing          when the baffle filters need to be cleaned after every 30 hours of 
use.  Filters can be cleaned by hand with non-abrasive soap or in a dishwasher.  Heavily soiled filters 
should also be soaked in grease cutting detergent prior to cleaning.

Baffle Filter Clean Indicator

When        flashes on display, the baffle filters 
installed are required to be cleaned.  This will occur 
after every 30 hours of use.

Re-setting Function

Reset the filter clean reminder timer when filters are 
cleaned and re-installed (with hood off).  Press and 
hold        for approximately 5 seconds, the display will 
appear; hold for approximately 5 seconds until        on 
display disappears        .  The filter clean reminder 
function is now reset and a new 30 hours elapse 
cycle is initiated.

F

Clean Filters

display < F > flashes

F

hold 5 sec.

display from  < F > to <    >

To Reset

F

F

F

To enable Clean Air Feature

With hood off, press and hold       for approximately 5 
seconds until the display shows         then         .

To disable Clean Air Feature

With hood off, press and hold       for approximately 5 
seconds until the display shows         then        . 

A

 -

Clean Air Feature

Clean Air is a feature that turns the fan on every 4 hours for 10 minutes to remove stagnant air in the kitchen. 
This feature is disabled by default and must be enabled by the user. When the clean air function is enabled, 
the blower will turn on speed 1, the display will flash between         and         until the 10 minute cycle has 
elapsed and the blower shuts down.   

1

 -

hold 5 sec.

display from  < - > to < A >

To Enable

A

 A

 - -

A

 -

hold 5 sec.

display from  < A > to < - >

To Disable

 A

Features & Controls – 

Features

Summary of Contents for Trapeze CTP-E48BSX



















































Reviews: