background image

W

arranty

TO OBTAIN SERVICE UNDER WARRANTY:
or any Service Related Questions, please call:

1-888-880-8368

Staple your receipt here.

Proof of the original purchase date is needed 

to obtain service under the warranty.

TO OBTAIN SERVICE UNDER WARRANTY: 

You must present proof of original purchase date.

Please keep a copy of your dated proof of purchase (sales slip) in order to obtain service under warranty.

One Year Service Repair Warranty:

For one year from date of original purchase, we will provide free of charge, service labor to repair any failed parts or 
components due to manufacturing defects.

Ten Years Parts Warranty:

For ten years from date of original purchase, we will provide free of charge, nonconsumable replacement parts or 
components that failed due to manufacturing defects. Consumable parts not covered by this warranty include: Light Bulbs, 
Metal and Carbon Filters.

Who is Covered:

This warranty is extended to the original purchaser for products purchased for ordinary home use in the 48 mainland 
states, Hawaii and Washington D.C. In Canada and Alaska, this warranty is Limited. There might be costs associated with 
shipping the products to our designated service locations or you might need to pay service technician’s travel costs, to 
have the appliance repaired in-home.

This Warranty will be Voided When:

Product damaged through negligence, misuse, abuse, accident. Improper installation and failure to follow installation 
instructions. When product is used commercially or other than its intended purpose. Damaged because of improper 
connection with equipment of other manufacturers. Repaired or modifi ed by anyone other than Zephyr’s Authorized Agents.

What is Not Covered:

Consumable parts such as light bulbs, fi lters, and fuses. Services outside of service area and the labor cost incurred in 
connection with the removal, shipping and reinstallation cost, nor does it cover any other contingent expenses. The natural 
wear of fi nish, and wear due to improper maintenance, use of corrosive and abrasive cleaning products, pads, and oven 
cleaner products. Chips, dents or cracks due to abuse, misuse, freight damage, or improper installation. Service trips to 
your home to teach you how to use the product. Damage of product caused by accident, fi re, fl oods or act of God.

This warranty is valid in the United States and Canada. It is non-transferable and applies only to the original purchaser and does not 
extend to subsequent owners of this product. Any applicable implied warranties, including the warranty of merchantability, are limited
in duration to a period of express warranty as provided herein beginning with the date of original purchase at retail and, no warranties,
whether express or implied, shall apply to this product thereafter. 

Have your product proof of purchase with date ready for warranty issues.
Or write to:

Zephyr Corporation
Service and Warranty Department
395 Mendell Street
San Francisco, CA 94124

Summary of Contents for Tornado II AK8200AS






















Reviews: