10
www.zephyronline.com
Installation –
Mounting the Hood
1
2
4
3
5
Top Duct Covers
Top Support Frame
Bottom Duct Covers
Bottom Support Frame
Thin Trim Piece
Thick Trim Piece
,QVWDOOHOHFWULFDODQGGXFWZRUN$FDEOHORFNQRWVXSSOLHGPLJKWEHUHTXLUHGE\ORFDOFRGHV),*(
Seal duct work with aluminum duct tape.
6. Power up hood, verify all functions and check for leaks around duct tape.
$VVHPEOH7RS'XFW&RYHUVZLWKORXYHUKROHVWRJHWKHURYHU7RS6XSSRUW)UDPHXVLQJ0[VFUHZV
RQHDFKVLGHRIWKHGXFWFRYHU),*)/DUJHUVFUHZKROHRSHQLQJVVKRXOGRYHUODSWKHVPDOOHUKROH
hopenings.
Note:
If using hood in ductless recirculating mode you must install the air diverter plate to the
Top Support Frame prior to assembling the duct covers. Turn to page 11 for more details.
6HFXUH7RS'XFW&RYHUVWR7RS6XSSRUW)UDPHE\XVLQJ[´VFUHZV),*)
$VVHPEOH%RWWRP'XFW&RYHUVWRJHWKHURYHUWRSGXFWFRYHUVXVLQJWKH¿QDO0[VFUHZVVFUHZV
RQHDFKVLGHRIWKHGXFWFRYHU),*)%RWWRP'XFW&RYHUVVKRXOGUHVWRQWRRG%RG\
,QVHUWWKH7KLQ7ULP3LHFHVLQWROHIWDQGULJKWVHDPVRI%RWWRP'XFW&RYHUVRQHDFKVLGH
),*)
,QVHUWWKH7KLFN7ULP3LHFHVLQWROHIWDQGULJKWVHDPVRI7RS'XFW&RYHUVRQHDFKVLGH
Note: Because less of the Top Duct Covers may be exposed, it may be necessary to measure
and cut the Thick Trim Pieces with a hack saw before installing them into the Top Duct Covers.
Measure and cut carefully.
FIG. F
Cable Lock
Cable Lock
$ FDEOH ORFNLQJ FRQQHFWRU QRW
VXSSOLHG PLJKW EH UHTXLUHG
by local codes. Check with
local requirements and codes,
purchase and install appropriate
connector if necessary.
FIG. E
WARNING: Electrical wiring must be done by a qualified person(s) in
accordance with all applicable codes and standards. This range hood must be
properly grounded. Turn off electrical power at service entrance before wiring.
!
