13
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent ,
or steel wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and buff
out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
'RQRWXVHDQ\SURGXFWFRQWDLQLQJFKORULQHEOHDFK'RQRWXVH³RUDQJH´FOHDQHUV
Metal Filters
7KHPHWDO¿OWHUVLQVWDOOHGE\WKHIDFWRU\DUHLQWHQGHGWR¿OWHURXWUHVLGXHDQGJUHDVHIURPFRRNLQJ7KH\QHHG
not be replaced on a regular basis but are required to be kept clean.
Filters should be cleaned after every 30 hours of use or once a month.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if
heavily soiled.
'U\¿OWHUVDQGUHLQVWDOOEHIRUHXVLQJKRRG
Replacing Metal Filters
6KRXOG¿OWHUVZHDURXWGXHWRDJHDQG
prolonged use, replace with following part
number:
Hood Model:
Part No.
Qty. to Order.
ZRM-E36AS
50200018
2
ZRM-E42AS
50200018
3
5HSODFHDQ\GDPDJHG¿OWHUWKDWKDVSXQFWXUHG
or broken mesh or damaged frame.
Metal Filter Dimensions:
15 3/4in. x 11in.
400mm x 279mm
Maintenance –
Cleaning and Installing Filters
Summary of Contents for Roma Island ZRM-E36AS
Page 2: ...www zephyronline com...
