12
Installation Instructions
Carbon Filter
A built-in carbon filter protects your wine by acting as a natural barrier against harmful
odors. The carbon filter should be replaced every 3-
6 months depending on the unit’s
exposure level to odor. If the unit is placed in a kitchen, regular replacement every three
months is ideal.
Remove the carbon filter by turning counterclockwise to unlock from rear panel.
Carbon Filter Replacement Part #: Z0F-C004
Installation Clearance Requirements
When installing the wine cooler under a counter, follow the recommended spacing
dimensions shown.
⚫
To ensure proper service access and ventilation, allow at least 1” of clearance at
the back as shown in the diagram.
⚫
The installation should allow the unit to be pulled forward for servicing, if
necessary.
⚫
The power cable is located on the back right of the unit and has a length of 72” to
accommodate multiple outlet locations.
⚫
An installation next to a wall will require a minimum 2-1/4” door clearance to
accommodate the handle.
Summary of Contents for PRW24F02BG
Page 11: ...11 Parts Identification Dimensions ...
Page 24: ...24 ...
Page 36: ...11 Identification des pièces et dimensions ...
Page 49: ...24 ...