17
PRRD24C1AS, PRRD24C2AS, PRRD24C2AP Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
Installation Clearance Requirements
When installing the refrigerator drawers under a counter, follow the recommended spacing
dimensions shown.
Ź
The recessed lower back section has a height of 7-5/8” and depth of 1” to accommodate the
electrical plug.
Ź
An installation next to a wall will require a minimum 1/4” clearance.
Ź
The cabinet should allow at least 24” for the width and 34” for the height to accommodate the
refrigerator drawers.
Ź
The power cable is located on the back right of the unit and has a length of 78-3/4” to
accommodate multiple outlet locations.
Ź
Once you are ready to install the unit, you must adjust the feet to level the refrigerator drawers.
An improperly leveled drawer may not close properly.
Ź
This refrigerator can be fully built-in to cabinetry and does not require any additional clearances
besides what is referenced below.
Ź
The installation should allow the unit to be pulled forward for servicing, if necessary.
24”
34” min.
1/4” min.
1”
7-
5/8
”
