11
www.zephyronline.com
14.
Note:
disregard this step if intending to install a in-
line blower.
Purchase and install the Internal blower (see
paragraph Before installing the hood - Parts not
supplied for model reference).
15.
If supplied dismounted for shipping, assemble the
lower part of the hood with the internal blower
housing:
a.
Remove the grease filter (see also Care & Use
section - Charcoal filter).
b.
Rest the internal blower housing on a flat surface
and thread completely the lower part of the hood
onto it.
REAR VIEW
c.
Connect all cables:
d.
Fasten the hood to the motor unit using 8
screws:
6 screws from the top
TOP VIEW
REAR SIDE
FRONT SIDE
2 screws from the bottom
BOTTOM
VIEW
REAR SIDE
FRONT SIDE
Inst
allation
Control
Panel
Lamps
