background image

7

Breeze I & Breeze II Use, Care, and Installation Guide

ZEPHYRONLINE.COM

Safety Information

READ AND SAVE THESE INSTRUCTIONS

WARNING

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE 
THE FOLLOWING:

a)  Installation work and electrical wiring must be done by qualified person(s) in accordance with all 
applicable codes and standards, including fire-rated construction.

b)  Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) 
of fuel burning equipment to prevent back drafting.  Follow the heating equipment manufacturer’s 
guideline and safety standards such as those published by the National Fire Protection Association 
(NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers 
(ASHRAE), and the local code authorities.

c)  When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden 
utilities.

d)  Ducted fans must always be vented to the outdoors.

e)  If this unit is to be installed over a tub or shower, it must be marked as appropriate for the 
application and be connected to a GFCI (Ground Fault Circuit Interrupter) - protected branch circuit. 

WARNING

TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

WARNING

Summary of Contents for Breeze I





























































Reviews: