Zenty ZT-157, User Manual

Page: 28 / 32

(844) 200-1945 | sales@zenty.com Page 28 of 32 Copyright © Zenty AV
Note:
•
If the Ethernet switch doesn’t support PoE, connect encoders and decoders to their power
adapters.
•
If the PoE switch is unable to provide enough power, connect encoders and decoders to their
power adapters
The IP300 series products allow you to use the front panel link DIP switch, PC configurator, Z Net
and IP controller to manage and control the encoders and decoders. This section briefly introduces
how to route the video from source to the display using these tools. By default, audio, video together
with IR, and USB signals are routed as a whole. For more information, see their guides. The following
tables describes how audio, video together with IR, and USB signals are routed using all the different
tools.