(844) 200-1945 |
Page 17 of 27
Copyright © Zenty AV
Control software operation:
The serial control software is illustrated with SSCOM32 as an example.
Basic Settings:
Double-click the software in the installation package to run specifically (as shown in
figure 1 below) and install the RS232 software on the computer.
In the parameter configuration area, the serial number of serial port and PC connection
is selected, and the baud rate of the communication protocol is completed: 115200
(default), data location: 8. Stop bit: 1, check bit: no, you can input the instruction in the
command input area and control the machine or remote receiver.
Instructions:
1. All commands start from “#”, command head “%c”: “d” parameters, “l” lock,
“s” save.
2. The “_” in
the commands cannot omit. Parameter: %d: 0 means ALL.
3. Command head & Parameter1 & Parameter2... need to add one “SPACE”.
The following table is only an example. Please refer to the list of instructions.
Summary of Contents for ZT-116
