Zenty ZT-114, User Manual, Page: 9 / 35

(844) 200-1945 | sales@zenty.com Page 9 of 35 Copyright © Zenty AV
Note:
Power On / Standby: Short press for standby mode; LCD screen will show, ” System
Shutdown” and TV will not display an image. Short press again to wake up from standb y
mode, HDMI output returns to normal
Video switch: Input (ex: O Input2 switches Output 1 to Input 2)
Mute HDMI Output Audio: M (ex: M mutes Output 1 audio)
Lock Remote Control : Short press ”W” to lock remote buttons | Short press again to unloc k
Turn Off Output Port: X (ex: O X disables Output 1 Port | X
again to enable Output Port)
Cycle Through Input Ports: “ < ” or “ > ” ; (ex: All + “ < ” cycles backwards throug h
source signals on ALL connected displays. Function automatically skips input port if no input
signal is detected)
Signal routing includes 4 input and 4 output channels that can be configured according
to the desired effect to form a 1×4 through 4×4 matrix. Users can route any input signal
to any output port or all output ports.