- 8 -
2. Make a connection to the TV using either step 2.1 or step 2.2
2.1 RF AV Cable Connection
(not required if you use the AV Cable in 2.2)
Use the supplied RF cable to plug into the “RF OUT” terminal on
the device. Plug the other end of the cable into the TV set. Be sure
to set the CH3/CH4 SWITCH on the device to match the same
channel you select on the TV set. If you set the CH3/CH4 switch on
the device to CH3, please change your TV set to channel 3. If you
set the switch to CH4, please change the channel on your TV set to
channel 4. Keep your TV on channel 3 or 4 (as selected above).
To watch different channels, use the supplied remote control to
change channels. If you change the channel on your TV set from
channel 3 or 4, you will not be able to see any TV signals.
2.2 AV Cable Connection
(not required if you use the RF Cable in 2.1)
Plug the black end of the supplied AV cable into the device “AV
OUT” connector, and plug the other ends of the cable into your TV,
YELLOW terminal for VIDEO IN, RED terminal to AUDIO IN (RIGHT),
WHITE terminal to AUDIO IN (LEFT). Set the Input using your TV or
TV remote to the corresponding Video Input mode
(It doesn’t matter
which channel your TV is set to when using the AV input mode).
3. Power Adapter Connection
Plug the power adapter into a wall outlet. Connect the other end to the
“DC IN” Jack on the device.
6-3. Start up
Ensure that your device is properly connected to your television as
described in 6.2 above, that you have inserted the batteries into the
remote and that your antenna is fully extended.
Press the power
button
on the device or remote control to activate the device.
Power Button